跳至內容

File:Screw vs Bolt.svg

頁面內容不支援其他語言。
維基文庫,自由的圖書館

原始檔案(SVG 檔案,表面大小:612 × 1,250 像素,檔案大小:161 KB)

摘要

描述
English: [English]

A=Screw B=Bolt 1: Tool drive form 1a: Shaft driven 1b: Eccentrically driven 2: Screw head 2a: Head in the mounting material 2b: Head on the mounting material 3:Shaft with thread 3a: Shaft fully threaded 3b: Shaft partly threaded 4: Thread profile 4a: Sharp narrow thread with cutting capacity 4b: Wide thread flattened or rounded 5: Thread spacing 5a: Thread with spaces 5b: Threads against each other 6: Start 6a: Thread at a distance from the beginning 6b: Thread from the beginning 7: Point 7a: Conical sharp point 7b: Flat tip 8: Screw hole size 8a: Screw hole equal to screw shank without thread 8b: Screw hole wider than the screw 9: (Start) Washer 10: Widened premilled hole start 11:Screw hole 11a: Pre-drilled narrow screw hole depends on the material, after which the thread automatically forms its way into the material. 11b: Pre-drilled hole always pre-drilled wider than the screw width 12: (End) Washer 13: Nut with counter thread for fastening

The screw drawing was originally from a file made by Wikimedia Commons user Kenfeisel, with a licensed under the Creative Commons Attribution-Share Alike 3.0 Unported license, see this link https://commons.wikimedia.org/wiki/File:Flathead_Screw.svg

The bolt drawing is orginially from a file from Pixabay, where the creator has released it explicitly under the license Creative Commons Zero, see this link on Wikipedia Commons https://commons.wikimedia.org/wiki/File:Bolt_and_nut.svg
Nederlands: A=Schroef B=Bout

1: Gereedschap aandrijvingsvorm 1a: Asaangedreven 1b: Excentrisch aangedreven 2: Schroefkop 2a: Kop in het bevestigingsmateriaal 2b: Kop op het bevestigingsmateriaal 3:Schacht met draad 3a: Schacht volledig bedraad 3b: Schacht deels bedraad 4: Schroefdraadprofiel 4a: Scherpe smalle schroefdraad met snijvermogen 4b: Brede schroefdraad afgevlakt of afgerond 5: Schroefdraad afstand 5a: Schroefdraad met spatie 5b: Schroefdraad tegen elkaar aan 6: Begin 6a: Schroefdraad op afstand van het begin 6b: Schroefdraad vanaf het begin 7: Punt 7a: Conische scherpe punt 7b: Vlakke punt 8: Schroefgat formaat 8a: Schroefgat gelijk aan schroefschacht zonder draad 8b: Schroefgat breder dan schroef 9: (Begin-) Ring 10: Verbrede verzinkte gat 11:Schroefgat 11a: Smalle schroefgat voorboren is materiaalafhankelijk waarna het draad zich vanzelf een weg vormt in het materiaal. 11b: Brede schroefgat altijd voorgeboord 12: (Eind-) Ring 13: Moer met tegendraad voor bevestiging

De schroef afbeelding was oorspronkelijk gemaakt door Wikimedia gebruiker Kenfeisel, uitgebracht met een Creative Commons Attribution-Share Alike 3.0 Unported licensie, zie deze link link https://commons.wikimedia.org/wiki/File:Flathead_Screw.svg

De bout afbdeeling is oorspronkelijk van een bestand afkomstig van Pixabay, uitgebracht met een Creative Commons Zero licensie, zie deze link op Wikipedia Commons https://commons.wikimedia.org/wiki/File:Bolt_and_nut.svg
日期
來源 自己的作品
作者 Public-Publicity

授權條款

The whole drawing is subjected as follow:

我,本作品的著作權持有者,決定用以下授權條款發佈本作品:
w:zh:創用CC
姓名標示 相同方式分享
您可以自由:
  • 分享 – 複製、發佈和傳播本作品
  • 重新修改 – 創作演繹作品
惟需遵照下列條件:
  • 姓名標示 – 您必須指名出正確的製作者,和提供授權條款的連結,以及表示是否有對內容上做出變更。您可以用任何合理的方式來行動,但不得以任何方式表明授權條款是對您許可或是由您所使用。
  • 相同方式分享 – 如果您利用本素材進行再混合、轉換或創作,您必須基於如同原先的相同或兼容的條款,來分布您的貢獻成品。

The Screw drawing section is originally made by Wikimedia Commons user Kenfeisel, it's source and lincense are:

https://commons.wikimedia.org/wiki/File:Flathead_Screw.svg

w:zh:創用CC
姓名標示 相同方式分享
您可以自由:
  • 分享 – 複製、發佈和傳播本作品
  • 重新修改 – 創作演繹作品
惟需遵照下列條件:
  • 姓名標示 – 您必須指名出正確的製作者,和提供授權條款的連結,以及表示是否有對內容上做出變更。您可以用任何合理的方式來行動,但不得以任何方式表明授權條款是對您許可或是由您所使用。
  • 相同方式分享 – 如果您利用本素材進行再混合、轉換或創作,您必須基於如同原先的相同或兼容的條款,來分布您的貢獻成品。

The Bolt drawing section is originally from the user OpenClipart-Vectors at Pixabay, it's source and lincense are:

https://commons.wikimedia.org/wiki/File:Bolt_and_nut.svg


該檔案來自Pixabay,其創作者已根據創用CC CC0授權條款(參見此處)公開發佈該檔案。 檔案編號:2024571

Creative Commons CC-Zero 此檔案在創用CC CC0 1.0 通用公有領域貢獻宣告之下分發。
在此宣告之下分發本作品者,已依據各國著作權法,在全世界放棄其對本作品所擁有的著作權及所有相關相似的法律權利,從而將本作品貢獻至公有領域。您可以複製、修改、分發和演示該作品,用於任何商業用途,所有這些都不需要請求授權。

說明

添加單行說明來描述出檔案所代表的內容
Screw vs Bolt.svg

在此檔案描寫的項目

描繪內容

檔案來源 Chinese (Taiwan) (已轉換拼寫)

image/svg+xml

6c3d823ca8294ee37b1f9c7eeece59ea3b703093

斷定方法:​SHA-1 中文 (已轉換拼寫)

233,641 位元組

1,250 像素

612 像素

檔案歷史

點選日期/時間以檢視該時間的檔案版本。

日期/時間縮⁠圖尺寸使用者備⁠註
目前2024年6月19日 (三) 08:17於 2024年6月19日 (三) 08:17 版本的縮圖612 × 1,250(161 KB)Public-Publicitysame image, smaller file size
2024年6月5日 (三) 15:32於 2024年6月5日 (三) 15:32 版本的縮圖612 × 1,250(229 KB)Public-Publicityhatch correction (it was not shown on wikipedia projects, although it was visible when viewed directly by the browser)
2024年5月12日 (日) 09:57於 2024年5月12日 (日) 09:57 版本的縮圖612 × 1,250(228 KB)Public-Publicitysmall edit
2024年5月12日 (日) 08:43於 2024年5月12日 (日) 08:43 版本的縮圖612 × 1,250(229 KB)Public-Publicitylittle adjustment - gradient
2024年5月12日 (日) 08:33於 2024年5月12日 (日) 08:33 版本的縮圖612 × 1,250(226 KB)Public-Publicityvarious drawing method enhancements (no significant context changes)
2024年5月9日 (四) 13:26於 2024年5月9日 (四) 13:26 版本的縮圖612 × 1,250(219 KB)Public-PublicityUploaded own work with UploadWizard

沒有使用此檔案的頁面。

全域檔案使用狀況

以下其他 wiki 使用了這個檔案:

詮釋資料